RANGE ROVER SPORT RANGE ROVER SPORT
RANGE ROVER SPORT RANGE ROVER SPORT
4
Comfort adjustments
Seat adjustment
Electric steering column adjustment
Comfort adjustments
Power seats
Bolster inflate/deflate1.
Lumbar support2.
Seat back angle3.
Seat forwards and back, cushion height and cushion 4.
angle
Adjusting the position
Press the 1. L or R button to select the relevant mirror.
Use the mirror adjuster to set the mirror position.2.
Powerfold door mirrors
Press the L and R buttons simultaneously to fold the
mirrors back. Press again to return the mirrors to the
opened position.
Driving position memory
Electric windows
Seat belts and child restraints
Passenger air bag deactivation
Clock setting
The steering wheel position can be adjusted in four
directions, corresponding with the movement of the
adjustment control.
With the vehicle stationary, rotate the control clockwise
then adjust the steering column to your ideal driving
position.
Return the control to the AUTO position.
Resonance with lowered windows
If a resonance/booming sound occurs when a rear
window is open, lowering an adjacent front window
about 1 inch (25 mm) will eliminate the conditiion.
Firmly press or lift the respective window switch and
release it. Movement can be stopped by briefly operating
the switch again.
When the rear window isolator switch is pressed an
indicator lamp illuminates in the switch.
Positions for driver’s seat, steering column and exterior
mirrors, can be stored in vehicle memory for future use.
Press the 1. M button to activate the memory store
function. The button will illuminate to indicate that the
memory store function is active.
Within 5 seconds, press buttons 2. 1, 2 or 3 to store the
current driving position to the chosen number. An existing
setting on that button will be over written.
A stored memory position can now be recalled with 3.
a press of the appropriate buton; 1, 2 or 3. The seat,
steering wheel and mirrors will move to their pre set
positions.
Operating note
Buttons 1, 2 or 3 must be pressed within five
seconds after pressing the M button otherwise the
memory store function will cancel.
A warning indicator on the instrument
panel will illuminate if a front seat belt is
unbuckled. This may be accompanied by an
intermittent chime.
The front passenger seat occupancy sensor determines
the state of seat occupancy and sets the air bag status
to suit.
From the Home screen, select System Settings. Touch
the Clock icon to access the Set Clock screen.
Use the scroll controls to set the time then press OK.
All clocks are synchronised.
Door mirrors
See page 3, item 35.
See page 3, item 6.
See page 3, item 33.
LRL189654111.indd 4 19/05/2010 12:48:53