EasyManua.ls Logo

Ranger Products R23 - User Manual

Ranger Products R23
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TIRE CHANGER
Model R23 / R23ST
FOR SERVICING
AUTOMOBILE
AND LIGHT TRUCK
SINGLE PIECE
TIRES/WHEELS
INSTALLATION AND OPERATION MANUAL
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the
purchaser upon receipt from the carrier. Consequently,
claims for the material damaged in shipment must be
made by the purchaser against the transportation
company at the time shipment is received.
BE SAFE
Your new Ranger tire changer was designed and
built with safety in mind. However, your overall
safety can be increased by proper training and
thoughtful operation on the part of the operator.
DO NOT operate or repair this equipment
without reading this manual and the important
safety instructions shown inside.
Keep this operation manual near the
machine at all times. Make sure that
ALL USERS read this manual.
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU
FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS
MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO OPERATE
THIS EQUIPMENT AS DIRECTED CAN MAY CAUSE INJURY OR DEATH.
REV 06-08-09
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Toll Free: 1-800-253-2363
Tel: 1-805-933-9970
Fax: 1-805-933-9160
www.rangerproducts.com
Question and Answer IconNeed help?

Do you have a question about the Ranger Products R23 and is the answer not in the manual?

Summary

Introduction and Safety

Installation and Operation Manual

Manual covers installation, operation, and safety for the tire changer.

Shipping Damage Claims

Procedures for filing claims for equipment damaged during shipment.

General Safety Precautions

General safety advice and warnings for operating the tire changer.

Product Warranty

Coverage, terms, and limitations of the tire changer's warranty.

Hazard Level Definitions

Explanation of danger, warning, and caution symbols and their meanings.

Owners Responsibility

Obligations of the owner for safe machine operation and maintenance.

Operator Protective Equipment

Recommended personal protective gear for tire service operations.

Important Safety Instructions

Critical safety rules to follow before and during operation.

Tire and Wheel Service Safety

Specific safety guidelines for servicing tires and wheels.

Machine Components and Setup

Description of Parts

Identification and function of the tire changer's main components.

Lifting and Handling

Instructions for safely lifting and moving the tire changer machine.

Uncrating Instructions

Steps for safely removing the tire changer from its packaging.

Installation

Guidelines for proper placement and setup of the tire changer.

Wiring Instructions

Electrical connection requirements and safety for the tire changer.

Air Source Requirements

Specifications for the compressed air supply needed for operation.

Operating Procedures

Operating Instructions

General guidance for operating the tire changer.

Bead Loosening and Demounting

Detailed steps for loosening tire beads and removing tires.

Wheel Mounting Instructions

Critical steps for properly mounting wheels onto the turntable.

Demounting Tube Type Tires

Specific procedures for demounting tires with inner tubes.

Mounting

General procedure for mounting tires onto wheels.

Mounting Tube Type Tires

Procedure for mounting tires that use inner tubes.

Inflation Instructions

Comprehensive guide to tire inflation processes.

Inflation Pedal Operation

Explanation of the three-position inflation pedal functions.

Bead Sealing

Steps for sealing the tire bead to the wheel rim.

Bead Seating

Ensuring tire beads are properly seated on the wheel rim.

Tire Inflation

Final steps for inflating the tire to the correct pressure.

Maintenance and Service

Maintenance Instructions

Guidelines for keeping the machine in good operating condition.

Monthly Maintenance

Regular monthly tasks for machine upkeep.

Tool Head Adjustments

Procedures for adjusting tool head setback and lift clearances.

Component Cleaning and Lubrication

Cleaning and lubricating parts like the mount/demount head and separator.

Inflation Pedal Pressure Limiter Maintenance

Checking and maintaining the inflation pedal pressure limiter.

Service and Maintenance Notes

Section for recording service and maintenance activities.

Ranger Products R23 Specifications

General IconGeneral
BrandRanger Products
ModelR23
CategoryTyre Changers
LanguageEnglish

Related product manuals