EasyManua.ls Logo

Rapid BGX7 - Page 13

Rapid BGX7
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
13
cable unit provided with the appliance
If the power supply cable is damaged it must
be replaced by the manufacturer, the man-
ufacturers after sales service or a similarly
qualified person in order to avoid any danger.
TECHNICAL SPECIFICATION
Lithium Ion battery operated glue gun
Tool size 155x150x50 mm
Weight 0,230kg
Electrical rating 3.6V DC 1500 mAh
Battery (integrated) 1 cell Lithium Ion
Heating up time approx. 20 s
Max temp approx. 170 °C
Glue sticks original Rapid diam 7 mm
Working time for one full battery charge Approx 30 min
Charging time 90% after 2 hours
The manufacturer reserves the right to change specifications without
notice.
USB charger
Input 100-240V 50-60Hz
Power rating 10 W
Output 5 VDC
Protection class double insulated
TECHNICAL FEATURES
: On/Off button
: Tool LED light (green/Red)
: Nozzle
: USB Socket
: Trigger
: Tool stand
: Charge
: USB cable
USAGE
Before using for the first time, fully charge the battery (3-4 hours) so
as to prolong its life. (see Charging Instructions)
Feed glue sticks in to the rear of the tool.
Use only Rapid glue sticks recommended.
Press on/off button for approx. 2 sec , Green LED will flash for
approx. 20 sec, and remain green fix when ready for use.
When using the tool for the first time, press the trigger several times
to fill the heating chamber with adhesive. It may also be necessary
to give the glue stick a short push to help it move in.
Place the nozzle of the tool against the surface and press gently on
the trigger to extrudeglue.
Place the second element in contact with the glue, if need be adjust
it and press parts together for an average of 10 seconds.
Never pull/remove a glue stick from the tool once is has been fed
into the tool. The resultant molten glue could create irreparable
damage to the tool.
Once finished, push the on/off button for approx. 2 sec.
When the battery is almost discharged, the LED will alternately flash
from red to green.
For safety reason if no use for approx. 3 min, the glue gun will auto-
matically switch it off.
Operation / Usage
LED Red LED green
BGX7_Manual_East_95x125_20191203.indd 13 2019/12/3 上午11:28

Other manuals for Rapid BGX7

Related product manuals