EasyManua.ls Logo

Rapid RT 80 User Manual

Rapid RT 80
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Schlagmäher
Tondobroyeuse
Flail mower
Ersatzteilliste und Bedienungsanleitung
Liste de Pièces de rechange et mode d’emploi
Spare parts list and Operation Manual
RT 80 Typ7113
RT 100 Typ7112
Rapid Technic AG Telefon +41 (0) 44 743 11 11
Heimstrasse 7 Telefax +41 (0) 44 743 14 62
Postfach 324
www.rapid.ch
CH-8953 Dietikon ezrapidtec@rapid.ch
Question and Answer IconNeed help?

Do you have a question about the Rapid RT 80 and is the answer not in the manual?

Rapid RT 80 Specifications

General IconGeneral
BrandRapid
ModelRT 80
CategoryLawn Mower
LanguageEnglish

Summary

Spare Parts List and Operation Manual

RT 80/100 Product Overview and Operation

General Specifications

Details on working width, total width, number of blades, and weight for RT 80/100 models.

Cutting Height Adjustment

Procedure for adjusting the cutting height using the rear roller bracket and screws.

Safety: Front Shield Requirement

Mandatory instruction to keep the front shield fitted during operation.

Routine Maintenance Schedule

Lubrication Every 8 Hours

Lubricate the flail shaft and wheel bearings on both ends.

Lubrication Every 40 Hours

Lubricate the pivot bearing.

Gearbox Oil Check Every 200 Hours

Check gearbox oil level, ensuring it is half full.

Annual Gearbox Oil Change

Procedure for changing the gearbox oil, including drain and filling ports.

Key Maintenance Procedures

V-Belt Tensioning and Shaft Alignment

Instructions for tensioning V-belts and aligning shafts, including release/tighten steps.

Blade Replacement and Balancing

Guidance on reusing blades and avoiding imbalances when installing new or worn blades.