RapidMesh RMWSL0227 User Manual (English)

To Next Page

1300 911 914 | sales@rapidmesh.com.au | www.rapidmesh.com.au

RMWSL0227 Above Bonnet Storage

Assembly Instructions

Additional Tools Required;

Hardware included;

10 x 50mm Hex Head Screws

23 x 60mm Hex Head Screws

2 x 70mm Hex Head Screws

17 x 80mm Hex Head Screws

Components included;

Roof x 2

Floor x 2

Front Panel x 2

Door x 2

Back Panel x 2

Side Panel x 2

Corner Legs x 4

Centre Leg x 1

Cantilever Support x 1

Joining Bracket x 1

47 x Nut

5 x Flanges

Need help?

Do you have a question about the RapidMesh RMWSL0227 and is the answer not in the manual?

RapidMesh RMWSL0227 Specifications

General

Lists the hardware screws, nuts, flanges, and main structural components included in the kit.

Provides a step-by-step guide for assembling the storage unit, including unpacking, loose fixing, tightening, and final placement.