Do you have a question about the Raptor 1000 and is the answer not in the manual?
Procedure to check and top up coolant level in the expansion tank.
Operation of the starting lever for enriching the fuel mixture during cold starts.
General inspection and checks before riding the motorcycle.
Steps to diagnose why the engine fails to start.
Verify the clutch lever switch operation for starting issues.
Check fuel level in the tank as a potential cause for starting problems.
Specific riding and RPM limits for the initial break-in period.
Procedure to check engine oil level using the sight glass.
Procedure for checking and adjusting drive chain tension and lubrication.
Procedure to check front brake pad wear.
Procedure to check rear brake pad wear.
Procedure for bleeding brake system every 20,000 km or two years.
| Transmission | 6-speed |
|---|---|
| Fuel Capacity | 4.5 gallons |
| Engine | 998cc, liquid-cooled, 4-stroke, DOHC, inline-four |
| Fuel System | Fuel injection |
| Brakes | Dual disc front, single disc rear |