Rex Series Folding Rack Assembly Instructions
Congratulations, you are now the owner of the Rex Series Folding Power Rack and we would
like to provide you with our recommendations for a successful installation of your new power
rack.
List of package contents
• (2) 90” Uprights
• (4) Arm connectors
• (2) Steel stringers
• (4) Hinges
• (1) C-Chanel pull up bar
• (2) 5/8 Red hitch pins for pull up bar
• (4) 5/8 Orange quick release hitch pins for hinges
• (8) 4.5” x 5/8 hex bolt, flat washer, split washer and nut
• (16) 2”x3/8 Lag bolts and flat washers
• (4) 5” Hex bolt and nylon washers
• (8) 1.5” Hex bolt flat washer and nut for hinges
Materials and tools needed
• (2) Crescent or ratchet and socket measuring 15/16
• Drill and bid measuring 1/4
• Measuring tape
• Water level
• Pencil
• Stud finder (optional)
To Next Page
Need help?
General