RAS MULTIBEND 9000 - Page 31

cLEANTNG,'-tlr-sTAtlltiitNIKiibdniNiiSsTorVtNii
ATTENTION!
Refer
to Chapter 5.2 "MAINS
CONNECTION"
to connect
the
main electrical supply
line
from the mains
to switchgear
cabinet.
Refer to
"CNC-COLOURGRAPHIC-CONTROLLER
MULTIBEND
9000 for RAS 74.20-40"
tor
machine
operation
and activation.
The machine
must not be
connected to the electric
system
and
not
put
into operation
before
the separate
"CNC
-
COLOU
RGRAPHIC-CONTROLLER
MULTIBEND 9000 for RAS
74.2O-4O"
manual has
been read and understood.
Chapter
2
"SAFETY"
must have been
read and understood
before
switching on.
Before
aligning
the machine,
the upper cheek must be
moved
upwards
by approx.
12 inches.
For this, it is necessary
to
connect
the folding
machine to
the electric system
(refer
to
Section 5.2 "MAlNS.
CONNECTION").
RAS 74.20-40
MULTIBEND
9OOO
I
Februar11,1994
3-9