MAIN I ENANUE
4.2.
LUBRICATION
-
Careful
lubrication is absolutely
vital for lrouble-free operation
of the folding machine and
precludes
expensive
repairs. This applies in
particular
to the
proper
lubrication of the ball
screws on the rear
plate
stop
and to
the two worm
gears,
used to adjust the
bending cheek.
-
The rnachine
must always be disconnected
from the electric system for
lubrication and all
work associated with
lubrication
-
turn
off
lhe main switch and secure with a safety lock.
-
Referto the enclosed
"LUBRICATION INSTRUCTIONS"
and the
"LUBRICATION
CHART
-
FACTORY DESIGNATION" foT
the
greasing
interuals,
quantities
and types of lubricant for
each
greasing
point.
-
Use
only non-fibrous cleaning cloths
when working on the hydraulic
system, to ensure that
no fibers can
get
into
the machine.
-
Lubricants,
such oils and
greases,
must be kept in clean, closed containers,
to keep
out dust
and moisture and to reduce exposure
to air and the associated oxidation
effect
to
a minimum.
The storage area
must be
dry
and cool.
RAS 74.2G,40
MULTIBEND 9OOO
l
l
i
I
i
.,
S€ptemb€r
7, 1
993
4'3
To Next Page
Loading...