RAS MULTIBEND 9000 - 4.3 Checking the Oil Level, Changing the Oil, Replacing the Filter

MAINTENANCE
4,3.
CHECKING
THE OIL
LEVEL,
CHANGING
THE OIL,
REPLACING
THE FILTER
The
machine
must
always be
disconnected
from
the electric
system
for
this.
The main
switch
on the switchgear
cabinet
must be
turned
off
(position O) and
secured
with
a
padlock.
The member
of
staff responsible
for this
work
must
take
possession
ofthe
padlock
keY.
4.3.1.
CHECKING
THE OIL
LEVEL,
CHANGING
THE
OIL
The hydraulic
system receives
its
supply
from a
21-gallon
oil
tank, fitted
to the cross
member
on
the
rear
side
of the machine.
The
oil level
must
be checked
through
the inspection
glasses
with min.
and
max. markings
before
commissioning
and
once a week,
plrticularly after the
machine
has run for
the f irst
time
when
all
pipes
and
cylinders
are filled
with
oil. The
oil must
be topped
up if necessary.
The
oil must
be changed
once
a
year
if
the rnachine
is
used
for single-shift
operation.
RAS
74.20-40
MULTIBEND
9OOO
:,
4-4
SeptemberT,
19!13