This document describes the RASLOK HCM-T7 cold, hot, and ambient water dispenser purifier, designed to provide high-quality, healthy, and tasty water.
Function Description
The RASLOK HCM-T7 is a water dispenser purifier that offers three temperature options: cold, hot, and ambient water. It features an internal smart filtration system to ensure water quality. The device is designed for ease of use and maintenance, providing an unlimited supply of purified water.
Important Technical Specifications
Power Supply:
- 110-120 volts:
- Voltage: 115V, 1 phase
- Frequency: 60Hz
- Cooling Power: 80W
- Heating Power: 500W
- UVC LED Power: 0.8W
- Total Power: 580.8W
- Current: 5A
- Refrigerant gas: R134a/1.34OZ
- Climate Class: ST/T
- 220-230 volts:
- Voltage: 230V, 1 phase
- Frequency: 50Hz/60Hz
- Cooling Power: 80W
- Heating Power: 500W/800W
- UVC LED Power: 0.8W
- Total Power: 580.8W/880.8W
- Current: 3A
- Refrigerant gas: R134a/38G
- Climate Class: ST/T
Water Capacities and Output:
- SUS 304 cold volume: 0.37GAL (1.4 L)
- Cold water output: 0.79GAL/H (3.0L/H)
- Cold water temperature: 41-50°F (5-10°C)
- SUS 304 heater volume: 0.27GAL (1.0 L)
- Hot water output: 1.3GAL/H (5L/H)
- Hot water temperature range: 181-194°F (83-90°C)
- Extra heating temperature range: 202-205°F (94-96°C)
Filtration System:
- Stage 1 filter (Sediment & Carbon Composite-PAC):
- Function: Removes sand, dust, mud, impurity, iron rust, and other substances. Absorbs unusual colors and odors, removes residual chlorine and organic substances, and uses special material to prevent scale water.
- Lifespan: 3000L (550GAL)
- Stage 2 filter (UF & ACF Composite):
- Function: Removes bacteria, iron rust colloids, and impurities. Carbon fiber further absorbs chlorine, micro-mole clues, and organic substances, and improves water taste.
- Lifespan: 3000L (550GAL)
General Specifications:
- Applicable water pressure: 0.1-0.4Mpa
- Rate Pure water Flow: 1.0-1.2L/M (0.26-0.31GAL/M)
- Applicable water: Tap/City Water
- Product size: 384(L)x296(W)x355(H) MM
- Packing size: 404(L)x344(W)x434(H) MM
- Net.Weight: 10.50 KGS/23.15 LBS
- Gross Weight: 11.80 KGS/26.01 LBS
Usage Features
User Interface (UI):
The device features a user-friendly interface with dedicated buttons for different water dispensing options and settings.
- Hot water big cup (Default 500ml): Red & White two-color light.
- Cold water big cup (Default 500ml)/UV working indication: Blue & White two-color light.
- Hot water small cup (Default 180ml): Red & White two-color light.
- Cold water small cup (Default 180ml): Blue & White two-color light.
- Extra Hot/Reboiling: Red & White two-color light.
- Ambient water big cup (Default 500ml)/Filter reminder: Red & White two-color light.
Button Functions and Operation:
- Hot Water Dispensing (Big Cup - 500ml):
- Child-lock ON: Long press the button for 2 seconds until a buzzer sounds and the light turns from white to red. Dispensing starts and stops when the light turns back white. Any button can stop dispensing prematurely.
- Child-lock OFF: Press the button once until a buzzer sounds and the light turns from white to red. Dispensing starts and stops when the light turns back white. Any button can stop dispensing prematurely.
- Hot Water Dispensing (Small Cup - 180ml):
- Operates similarly to the hot water big cup, with the button light showing red during sterilizing/heating status and turning back white when finished.
- Extra Hot/Reboiling Function:
- Activates/deactivates the reboil function. When activated, the light turns from white to red until the water reaches 95°C, then turns white again. Default light is white.
- Cold Water Dispensing (Big Cup - 500ml):
- Press the button once. A buzzer sounds, blue and white LED lights turn on, and cold water dispenses. The light turns back white when finished. Any button can stop dispensing prematurely.
- Cold Water Dispensing (Small Cup - 180ml):
- Press the button once. A buzzer sounds, the light turns from white to blue, and cold water dispenses. The light turns back white when finished. Any button can stop dispensing prematurely. During cooling status, the button light remains blue until finished.
- Ambient Water Dispensing (Big Cup - 500ml)/Filter Reminder:
- Press the button once. A buzzer sounds, the light turns from white to blue, and ambient water dispenses. The light turns back white when finished.
- When the filter element life is due, the light turns red and a buzzer sounds, reminding the user to replace the filter.
UVC LED Sterilizer:
- Working Principle: Operates in a cycle of "working 2 hours and stopping 1 hour."
- Indication: Both blue and white lights of the cold water big cup button turn on when UVC is working.
- Activation: UVC starts whenever cold or ambient water is dispensed. The light turns back white when dispensing stops.
- Failure Indication: If UVC fails, the cold water big cup button flashes 3 times every 2 hours.
Settings:
- Water Temperature Setting (Default 90°C for hot water, 95°C for extra hot):
- Press the hot water big cup and cold water big cup buttons together for one second until the hot water big cup icon blinks.
- Increase temperature: Press the hot water big cup button (1°C per press, max 2°C increase).
- Decrease temperature: Press the cold water big cup button (1°C per press, max 3°C decrease).
- Skip to extra hot water temp setting: Press the extra hot/reboiling button.
- During extra hot temp setting, the extra hot icon blinks. Increase/decrease similarly (1°C per press, max 1°C change).
- Exit setting: Press the ambient water big cup button.
- Note: Activating temp setting status restores factory default settings for hot and extra hot temperatures.
- Cooling On/Off Function:
- Press the cold water big cup and cold water small cup buttons together for one second to turn off cooling.
- Press them again to turn on cooling.
- Note: Cooling function is always on by default after power off and restart.
- Child-Lock On/Off Setting (Default "ON"):
- Press the hot water big cup and ambient water big cup buttons together for one second to turn off child lock.
- Press them again to turn on child lock.
- Child lock ON: Long press hot water big cup or hot water small cup button for 2 seconds to dispense.
- Child lock OFF: Short press hot water big cup or hot water small cup button for 1 second to dispense.
Night Light & Program Memory:
- Night Light: Always shows blue by default. Turns red for hot water, blue for cold water, and red and blue for ambient water dispensing.
- Memory: All settings data are saved for one week when the machine is powered off. Otherwise, re-setting is required.
- Buzzer: Any button touch activates the buzzer with a chord voice.
First Time Use Attentions:
- Ensure the input water pipeline is well connected.
- Make sure the heating switch on the back is in the OFF(0) position.
- Connect the plug to the power supply.
- Dispense hot or cold water first:
- Hot water: Keep pressing the hot water big cup or hot water small cup button for 2 seconds (due to child lock) until water comes out.
- Cold water: Press the cold water big cup or cold water small cup button until water comes out.
- Turn on the heating switch at the back of the machine to start heating.
Dry Heating Protection Alarm and Compressor Protection Function:
- Dry Heating: If the heating element sensor detects dry heating, the system stops heating. The hot water big cup and hot water small cup buttons will flash. This alarm can only be removed by powering off and restarting the machine.
- Compressor Protection: When cooling is complete (cold water reaches 5 degrees), the compressor stops and cannot restart for 4 minutes. After 4 minutes, if the cold water temperature reaches the cooling start point, the compressor restarts. If the temperature does not reach the cooling start point after 4 minutes, the protection function ends.
Maintenance Features
Filter Lifespan Setting:
- Filter Life Data:
- Used flow (L): ≤3000L (for Stage 1) and ≤2800L (for Stage 2)
- Ambient water button: White (normal), Red (due)
- Calculation Method: Lifespan is calculated simultaneously by a flow-meter. The first filter to reach its limit determines the replacement standard.
- Reminder: When filter lifespan is less than 200L, the dispensing button light turns red. When the filter element life is due, a buzzer sounds 3 times every 3 hours, and the ambient water button flashes red for 10 seconds until reset.
- Filter Life Reset: Press both the hot water big cup and ambient water buttons together for 5 seconds (until a buzzer sounds) to reset the filter life.
Filter Replacement Guideline:
- Step 1: Take out the filter cover.
- Step 2: Take out and turn the filter in the arrow direction.
- Important: Cut off the water source and unplug the device before replacing filters. Never plug filters in when water is running.
Installation:
- Open the top of the packing case, remove the top foam and accessories.
- Unpack the product and install the water collector.
- Take out the quick joint and install it on the water pipe.
- Filter Cleaning: Filters should be cleaned for first use by flushing them for 10 minutes.
- Installation Dimension: Pay attention to installation dimensions to avoid blocking air inlet and outlet.
- Drip Tray: Ensure the drip tray cover is properly placed inside the machine to prevent falling off.
- Water Inlet Connection: Remove the pin from the quick joint at the rear, take out the blue plug, insert the water inlet PE pipe into the quick joint, and tighten the pin.
- Power Connection: Plug the water cooler cord into a ground fault interrupter receptacle.
- After installation, supply power and begin using the water purifier.
- When installing or replacing filters, turn off the water and power supply.
Troubleshooting Guide:
In case of failure, inspect according to the following requirements. If unresolved, contact the local service agency.
- Small water flow: Check tap water. If filter not replaced in time, contact service agency.
- Water leakage: Inspect connector for proper pipe connection. Replace water pipe and PE pipe if bursting.
- Electric leakage: Use a three-pin socket with earth wire to ensure proper grounding.
- Noisy operation: Place the machine on a steady and solid surface.
- Machine fails to run: Switch on power supply.
- Hot water big cup and hot water small cup buttons flash red (Dry heating alarm): Power off, ensure heater has water supply, wait 5 minutes, then turn on.
- Hot water big cup and hot water small cup buttons flash red (Hot NTC sensor Error): NTC terminal loose or failed, reconnect or change with new.
- Cold water big cup and cold water small cup buttons flash blue and red (Cold NTC sensor Error): NTC terminal loose or failed, reconnect or change with new.
- Cold water big cup and cold water small cup buttons flash blue and red (Water shortage): Check water source/filter/flow-meter or contact local service agent.
- Ambient water big cup button flashes red every hour (Filter life expire): Replace filter and reset.
Notes:
- Slight noises during heating are normal.
- If the heating element heats without water, the anti-dry heating device disconnects. Ensure water supply, power off the dispenser, wait 5 minutes, and power on again.
To Next Page
Need help?
General
