To Next PageTo Next Page
Need help?Do you have a question about the Rasonic RCF-9KW and is the answer not in the manual?
Specifies the product model number for easy identification.
Indicates the intended use is restricted to domestic environments.
Advises users to read the manual thoroughly before use and keep it for future reference.
Emphasizes strict adherence to precautions to prevent injury or damage.
Users must use certified sockets to avoid fire hazards.
Appliance can be used by children 8+ with supervision; they must not play with it.
Grip the plug firmly when disconnecting, never pull the cord.
Ensure the plug is fully inserted to prevent electric shock or overheating.
Periodically clean dust from plugs and sockets to prevent poor insulation and fire.
Do not use if the power cord is damaged; contact service for repair.
Do not pinch, bend, or twist the power cord to prevent conductor exposure.
Prevent water contact to avoid leakage, short circuits, or fire.
Do not cover the fan body to prevent overheating.
Avoid placing any objects on the fan body.
Never touch power plugs with wet hands to prevent electric shock.
Do not insert fingers or objects into air outlets to avoid injury or shock.
Do not strike or vibrate the fan body during operation.
Do not use the fan in direct sunlight.
Arrange the power cord properly to prevent tripping.
Operate the fan on a flat and stable surface.
Do not use near flammable gases, water, insecticides, or corrosive solvents.
Do not hang wet clothes or allow water to drip onto the unit.
Do not spray insecticides or flammable liquids near the fan.
Turn off the fan when leaving the product unattended to prevent accidents.
Avoid prolonged direct airflow, especially towards infants and children.
Always unplug the fan before cleaning or maintenance.
Clean the exterior with a damp cloth; avoid corrosive cleaners or washing with water.
Do not block air intake/outlet with objects to maintain airflow performance.
Clean dust from air intake if abnormal sound or uneven speed occurs.
Unplug, pack, and store the fan in a dry, well-ventilated place when not in use.
Identifies the protective front grille and cover.
Identifies the rotating blades responsible for air circulation.
Locates the buttons and indicators on the main unit.
Identifies the rear protective grille and cover.
Identifies the stand that supports the fan unit.
Locates the grip for carrying the fan.
Indicates the designated spot for storing the remote control.
Identifies the electrical cord for connecting to power.
Controls the vertical oscillating movement of the fan head.
Selects between Normal, Natural, and Sleep fan modes.
Adjusts the fan speed, indicated by LED lights.
Powers the fan unit on or off.
Sets the automatic shut-off timer for the fan.
Controls the horizontal oscillating movement of the fan head.
Buttons to increase or decrease the fan speed.
Sets the desired timer duration for the fan to turn off.
Selects operating modes like Normal, Natural, or Sleep.
Activates or deactivates the horizontal oscillation function.
Turns the fan unit on or off remotely.
Activates or deactivates the vertical oscillation function.
Unplug the unit and wait for the fan to stop before cleaning or servicing.
Instructions on how to remove the front cover for cleaning.
Steps to detach the fan blade cover and fan blade for cleaning.
Place the fan on a stable, flat surface and connect to a suitable power outlet.
Activate or deactivate the vertical oscillation function.
Choose between Normal, Natural, or Sleep modes.
Adjust speed using '+' and '-' buttons, indicated by LED accumulation.
Press the button to turn the fan on or off; a beep sound is heard.
Select timer options: 1, 2, 4, or 8 hours.
Activate or deactivate the horizontal oscillation function.
Lights dim after 60s of inactivity or turn off when 'Mode' is long-pressed.
Ensure fan blade is fully inserted for proper operation.
Avoid immersing power cord, plug, or unit in water.
Use a damp cloth; avoid harsh chemicals, gasoline, or corrosive cleaners.
Remove rear cover to access and wash the filter under running water.
Ensure fan blade and front cover are completely dry before reassembly.
Do not wrap power cord tightly or put pressure on it during storage.
It is recommended to clean the product at least once a month.
Store in original packaging in a cool, dry, and safe place for prolonged periods.
Product model: RCF-9KW.
Product colour: White.
Electrical input requirement: 220-240V.
Electrical frequency requirement: 50-60Hz.
Power consumption of the fan: 25W.
Physical size of the fan: 298 x 261 x 378 mm.
Weight of the fan: 3.10kg.
Company reserves the right to interpret content and correct errors.
Manual may be updated for technical improvements without notice.
Contact hotline for an electronic version of the user manual.
One-year free repair/replacement for defects under normal use.
Present invoice and guarantee certificate for service.
Lists conditions that void the warranty, such as modification or misuse.
Observe precautions to avoid injury to self or others and damage to belongings.
Using non-certified sockets may cause fire.
Appliance use by children 8+ requires supervision and instruction on hazards.
Children shall not play with the appliance, climb on it, or perform cleaning without supervision.
Hold the main plug when disconnecting; never pull the supply cord.
Ensure the main plug is fully inserted into the socket to prevent shock or fire.
Wipe dust from plugs and sockets periodically to maintain insulation.
If power cord or plug is damaged, it must be replaced by authorized service.
Do not pinch, bend, or twist the power cord excessively to prevent damage.
Do not contact with water, as it may cause fire and electric shock.
Do not cover the fan to prevent overheating.
Do not place any objects on the fan body.
Never touch the fan with wet hands to avoid electric shock.
Do not insert fingers or conductive objects into air outlets to prevent injury.
Avoid shocks, frictions, or concussions to the fan.
Do not place the fan under a power socket when in use.
Do not use the fan in direct sunlight.
Place the power line correctly to prevent tripping.
Place the fan on flat and stable ground when using.
Do not pour water into the machine or hang wet clothes over it.
Do not spray solvents or flammable liquids on the fan.
Shut down the machine before the user leaves to avoid accidents.
Avoid continuous direct wind exposure, especially for infants and children.
Cut off power and unplug before cleaning or maintenance.
Clean with a damp cloth and mild detergent; do not use corrosive cleaners.
Do not place air intake/outlet near walls or curtains to avoid blocking airflow.
Clean air intake grid with a brush if abnormal sound or uneven speed occurs.
Cut off power, unplug, pack, and store in a dry, well-ventilated place.
Identifies the protective front grille and cover.
Identifies the rotating blades responsible for air circulation.
Locates the buttons and indicators on the main unit.
Identifies the rear protective grille and cover.
Identifies the stand that supports the fan unit.
Locates the grip for carrying the fan.
Indicates the designated spot for storing the remote control.
Identifies the electrical cord for connecting to power.
Controls the vertical oscillating movement of the fan head.
Selects between Normal, Natural, and Sleep fan modes.
Adjusts the fan speed, indicated by LED lights.
Powers the fan unit on or off.
Sets the automatic shut-off timer for the fan.
Controls the horizontal oscillating movement of the fan head.
Buttons to increase or decrease the fan speed.
Sets the desired timer duration for the fan to turn off.
Selects operating modes like Normal, Natural, or Sleep.
Activates or deactivates the horizontal oscillation function.
Turns the fan unit on or off remotely.
Activates or deactivates the vertical oscillation function.
Always unplug the unit and wait for the fan to stop before cleaning.
Instructions for unscrewing and turning the front cover to remove it.
Steps to remove the fan blade cover and fan blade for washing.
Place the fan on a stable flat surface and connect to a 220V-240V outlet.
Activate or deactivate the vertical oscillation of the fan.
Choose between Normal, Natural, or Sleep modes.
Set desired speed (1-8) using '+' and '-' buttons; indicator lights accumulate.
Press the button to turn the unit on or off; a 'Bi, Bi' sound is heard.
Activate the timer for 1, 2, 4, or 8 hours.
Activate or deactivate the horizontal oscillation of the fan.
Lights dim after 60 seconds of inactivity or turn off by long-pressing 'Mode'.
Ensure fan blade is fully inserted for correct operation.
Avoid immersing the power cord, plug, or entire unit in water.
Clean surfaces with a damp cloth; avoid gasoline, benzene, or corrosive detergents.
Use a damp cloth to clean surfaces; do not pour water into the machine.
Ensure fan blade and front cover are installed and dried before use.
Do not wrap the power cord tightly around the unit or put pressure on it.
Clean the fan every month for optimal performance.
Store in a cool, dry, and safe place if not used for a long time.
Product model: RCF-9KW.
Product colour: White.
Electrical input requirement: 220-240V ~.
Electrical frequency requirement: 50-60Hz.
Power consumption of the fan: 25W.
Physical size of the fan (W x D x H): 298 x 261 x 378 mm.
Weight of the fan: 3.10kg.
The company reserves the right to interpret content and correct errors.
The operation manual may be updated for technical improvements without prior notice.
Users can request an e-copy of the manual by calling the hotline.
Provides free repair or replacement for defects under normal use within one year.
Present official invoice and guarantee certificate for free maintenance.
Details conditions not covered by warranty, including modification, misuse, or damage.
Contact details for Shun Hing Electric Works & Engineering Co., Ltd.
Contact information for Shun Hing Electric Service Centre Ltd.
Hotline for inquiries about spare parts and accessories.
Locations and contact details for customer service centres in Hong Kong and Macau.
General| Model | RCF-9KW |
|---|---|
| Category | Fan |
| Oscillation | Yes |
| Number of Blades | 3 |
| Frequency | 50Hz |
| Color | White |
| Speed | 3 |
| Voltage | 220V |
