To Next PageTo Next PageWhat to do if error codes occur on my Rasonic Cookers?
If your Rasonic cooker displays error codes, especially E1, E2, or E7, first ensure you're using suitable cookware. If an overheat error appears (E2, E7), let the appliance cool down before trying again. For error codes E0, E3, E4, E5, or E6, it indicates a more complex issue, and you should contact Shun Hing Electric Service Centre Ltd. for assistance.
Why does my Rasonic Cookers interrupt heating and beep?
If your Rasonic cooker stops heating during normal use and beeps, it could be due to several reasons: * You might be using incompatible cookware or no cookware at all. If so, replace it with compatible cookware. * The cookware may not be centered on the heating zone. Ensure it is placed correctly in the center. * The cookware might be repeatedly removed from the heating zone. Keep the cookware within the heating zone during operation.
General| Power | 700W |
|---|---|
| Voltage | 220-240 V |
| Timer | 24 hours |
| Display | LED |
| Frequency | 50/60 Hz |
| Non-stick Inner Pot | Yes |
| Keep Warm Function | Yes |
| Steam Function | Yes |
| Weight | 3.2kg |
| Type | Rice Cooker |
| Control | Touch |
