What to do if my Rasonic RSG-R80G Oven cannot operate?
If your Rasonic Oven isn't operating, it could be due to a power suspension. Try again after power is restored. Alternatively, the appliance might not be properly connected to electricity, in which case you should assign a qualified technician to connect it.
Why does the display not light up on my Rasonic Oven?
If the display on your Rasonic Oven doesn't light up, first check if the appliance is properly connected to the electricity supply (power plug with fuse). If it is and the display still doesn't light up, the PCB might be damaged.
What to do if there is water or steam leakage from Rasonic RSG-R80G Oven door?
If you notice water or steam leaking from your Rasonic Oven door, make sure the door is closed tightly. If the leakage continues, the door rubber sealing might be damaged.
What causes abnormal indication on the display of Rasonic Oven?
An abnormal indication on the display of your Rasonic Oven can be caused by a damaged display or a damaged PCB.
Why temperature does not rise in my Rasonic RSG-R80G Oven?
The temperature in your Rasonic Oven might not rise if the evaporator is damaged, the PCB is damaged, or the temperature sensor is damaged.
What causes exhaust fan malfunction in Rasonic RSG-R80G Oven?
An exhaust fan malfunction in your Rasonic Oven can be caused by a damaged fan motor or a main PCB malfunction.
Why is no steam generated in my Rasonic Oven?
No steam generation in your Rasonic Oven can be due to a folded, blocked, or damaged hose, a damaged steam generator, or an improperly sealed waterflood system.
What does E-3 error mean on Rasonic Oven?
E-3 error on your Rasonic Oven indicates a cavity low temperature protection issue. This means a long idle time resulting in cavity temperature keeps lower than 35?, which is not suitable to continue cooking function. Stop the operation and restart the appliance.
What does E-4 error mean on Rasonic RSG-R80G Oven?
E-4 error on your Rasonic Oven indicates an evaporator low temperature protection issue. This means no temperature rise after operating 5 minutes and temperature of evaporator keeps lower than 35?. Stop the operation and restart the appliance.
What does E-1 error mean on Rasonic RSG-R80G Oven?
E-1 error on your Rasonic Oven indicates a high temperature protection issue, meaning the temperature in the sensor is higher than the protection value.
Precautions for initial use and general safety guidelines.
Guidelines for safe and proper operation of the appliance.
Power cord information, product, and cabinet dimensions for installation.
Important notices and warnings related to appliance installation.
Step-by-step cleaning, component care, and safety tips.
Diagram and labels for the appliance's internal and external components.
Explanation of icons and functions on the appliance's display and control panel.
Standby, selection, first-time use, and water filling procedures.
Guide to selecting and setting cooking modes, time, and temperature.
How to use special functions and built-in recipes.
Advice for cooking, changing functions, and using the oven lamp.
Explains normal phenomena and how to resolve error codes.
General| Model Number | RSG-R80G |
|---|---|
| Timer | 120 minutes |
| Capacity | 80L |
| Power Source | Electric |
| Voltage | 220-240V~ |
| Frequency | 50Hz |
To Next Page