7
Do not count damp or serverly damaged notes.
Do not count broken, deformation notes which may cause jammed.
Check whether on a bill or mixed with a paper clips, stitching needle, rubber bands etc. to avoid the counting error
or notes jammed.
Place the notes orderly in the correct way shows below.
Bundle the banknotes and place the banknote stack to be counted centered on the banknote feeder after adjusting
the feeder rails for the banknotes.
Placing Notes
[EN]
To guarantee a perfect operation, regular cleaning and maintenance of the device is imperative. Deposits that build
up over time, such as dust on optical sensors, can lead to an increasing number of error messages.
Use the correct cleaning set and the compressed air spray from ratiotec.
To Next Page
Loading...
Need help?
General
