·
12
·
5. AC Circuit Breaker
The overload current will automatically switch OFF circuit breaker to avoid
short circuiting of the load or overload. If the circuit breaker is switched OFF
automatically, check load before switching the circuit breaker ON again.
6. Ground Terminal
This ground terminal is dedicated to reliably grounding the whole
generator.
7. Oil Alert System
The oil alert system is especially designed to prevent engine damage
caused by an insufficient amount of oil in the crankcase. When the oil
level in the crankcase fall down below the safe limit, the oil alert system
will automatically shut down the engine(though the generator switch still
remains in the ON position), so that the engine can’t be damaged due to
the insufcient amount of the oil.
AC CIRCUIT BREAKER
ON
OFF
GROUND TERMINAL
CONTROL
To Next Page
Loading...
