Need help?Do you have a question about the Rato RG1.7-45Q-D and is the answer not in the manual?
Instructions for connecting the tie rod to the handle bar elements for correct assembly.
Procedure for fitting caps onto the ends of the milling cutter axles.
Steps for refilling oil in the drive and engine, specifying quantities and procedures.
Guide on inserting and fixing the strut at the desired height using pins.
Explanation of how the throttle lever regulates engine and forward speed.
Steps to engage and disengage the milling cutters and forward movement.
How to adjust the strut for different hoeing depths.
Instructions for positioning the auxiliary wheel for movement or working.
Procedure for starting the engine using the starter cable.
Steps to prepare and operate the machine for tilling and loosening soil.
Procedures for safely stopping the machine and preparing for storage.
Steps for removing and replacing milling cutters, including warnings about the assembly.
Guidance on adjusting the engagement cable for smooth operation.
A schedule detailing maintenance tasks for engine oil, air filter, spark plug, etc.
Detailed steps for performing engine oil replacement.
Instructions for checking, cleaning, or replacing the air filter element.
Steps for checking, cleaning, and adjusting the spark plug gap.
To Next Page
General