RATTAN QUERCUS - Page 13

- 11 -
Notice: Install gently by hand without cross-threading or damaging the
threads. Fix the fenders by tightening the screws each side on
the front fork.
Adjusting the Seat
DO NOT raise the seat-post beyond
the minimum insertion marked on
the tube.
2.
Close the quick release lever using
your palm or finger.
4.
Untighten the quick release lever by
swinging the lever open and outward
fully.
1.
Adujst the seat and the head of the
seat is parallel with the top tube.
3.