Rauch AXIS-H 30.1 EMC+W - Page 44

Service manual
AXIS H-EMC/ AXIS H-EMC + W
Implement ECU software update as of
SW 2.08.00
Rauch Landmaschinenfabrik GmbH
+49 (0)7221/985-250 service@rauch.de
Page 13 of 16
Update SW
2.08.00
27/08/14
Chapter 410
SC type DIST/LENGTH
=> calculation of
the GPS switching points via distance and
depth of the spreading pattern
• CCI terminal
• Müller terminal as of SW 4.xx.xx
• TopCon
SC type DIST/TIME => calculation of the
GPS switching points via distance and 2
times
• John Deere terminal
• Müller terminal up to SW 3.96.xx
• Trimble system
• AgriTouch (AgriCon)
• AgLeader
CAUTION! Ask the terminal manufacturer
if applicable