Ravanson FH-101 - Transport and Storage; Technical Parameters

• Cover the device when it is turned on
FAILURES
If any damage is disclosed after purchase, contact the seller.
Follow the rules in this manual.
Do not modify the product.
When the device does not work, unplug it. Check if there is power in the socket the device is connected to.
If power was not disrupted, do not attempt to repair the device on your own. Contact manufacturer's
authorized service centre.
TECHNICAL SERVICE
All devices undergo a thorough post production control. If you still find any fault, you can ask technical service
for help.
Before you talk to technical service, check if:
• There is power in the wall socket.
• You followed this manual when turning the device on.
CLEANING THE HEATER AND MAINTENANCE
• Always un-plug the heater from the outlet.
• Allow it to cool down before cleaning.
• Clean the outside of the heater by wiping with a dry or slightly wet cloth and buff with a dry cloth. Do
not use any detergents or abrasives and do not allow any water to enter the heater. Do not submerge
in water!
TRANSPORT AND STORAGE
• When the heater is not used for long periods of time, it should be protected from dust and stored in a
clean, dry place.
• Store out of reach of children. Protect against dust, humidity, and mechanical damage.
• Transport in the original packaging. Protect against dust, humidity, and mechanical damage.
• Always let the device cool down prior to storage or transport.
NOTE !
The illustrations and descriptions may differ from reality depending on the product model.
Manufacturer reserves the right to change the technical parameters of the device without notice.
TECHNICAL PARAMETERS
Model Nominal voltage Nominal
frequency
Nominal power
consumption
FH-101 220-240V 50/60 Hz 2000 W
FH-105/ FH-105B 220-240V 50/60 Hz 2000 W
FH-200 220-240V 50/60 Hz 2000 W
FH-300 220-240V 50/60 Hz 2000 W
FH-505 220-240V 50-60 Hz 2000 W
FH-900 220-240V 50-60 Hz 2000 W