TECHNICAL SERVICE
All devices undergo a thorough post production control. If you still find any fault, you can ask technical service
for help.
Before you talk to technical service, check if:
• There is power in the wall socket.
• You followed this manual when turning the device on.
CLEANING THE HEATER AND MAINTENANCE
• Always un-plug the heater from the outlet.
• Allow it to cool down before cleaning.
• Clean the outside of the heater by wiping with a dry or slightly wet cloth and buff with a dry cloth. Do
not use any detergents or abrasives and do not allow any water to enter the heater. Do not submerge
in water!
TRANSPORT AND STORAGE
• When the heater is not used for long periods of time, it should be protected from dust and stored in a
clean, dry place.
• Store out of reach of children. Protect against dust, humidity, and mechanical damage.
• Transport in the original packaging. Protect against dust, humidity, and mechanical damage.
• Always let the device cool down prior to storage or transport.
NOTE !
The illustrations and descriptions may differ from reality depending on the product model.
Manufacturer reserves the right to change the technical parameters of the device without notice.
TECHNICAL PARAMETERS
Model Nominal voltage Nominal
frequency
Nominal power
consumption
FH-2000RW 220-240V 50 Hz 1700 - 2000 W
FH-2000RB 220-240V 50 Hz 1700 - 2000 W
To Next Page
Loading...
