7
Use the device at a safe distance from inflammable materials such as:
curtains, paper, bedding, wooden or plastic elements, etc.
WARNING! If the heating surface is cracked, turn the power off to
avoid electric shock.
WARNING! The device is not intended to work with external time
switches or separate remote control system.
WARNING! Accessible surfaces may become hot during use. Do not
touch the accessible surfaces during use. Pay particular attention to
children and animals.
NOTE!
Despite proper use of the device and following all safety guidelines, some specific residual risks cannot be completely
eliminated.
Before cleaning, unplug from the mains.
Store and transport in a package protecting against dust, moisture and mechanical damages.
TECHNICAL PARAMETERS
Model HP-8010 HP-8020
Voltage
Frequency
Rated power
PURPOSE AND USE
The device is designed for cooking and re-heating food and only for domestic use. The appliance should only be used
for private use, as intended for the appliance. This appliance is not intended for commercial use.
WARNING!
Before plugging, make sure if the mains voltage corresponds to the voltage given on the appliance’s name plate.
Device is made in the first protection class, which means that it must be plugged into an electrical outlet with a
ground prong.
Put the appliance on a flat surface that is resistant to high temperature. Turn the adjustment knob to start the device.
This is evidenced by the control lamp.
During the first start set the adjustment knob to “MAX” position.
WARNING! During the first use, an unpleasant odour and gentle smoke can appear. This may last a few minutes.
If this condition persists for a long time, turn the device off.
After reaching the set temperature the thermostat will disconnect the heating element.
Before each use, check the condition of the appliance for mechanical damages, check if the power cord is not damaged.
Do not operate the appliance with a damaged cord.
Turn the knob from “OFF” to the desired value from the “MIN” to “MAX”. The indicator light illuminates when the
heating element is working. The thermostat will maintain the temperature set by the user periodically switching on
and off the heating element.
Do not use pots that are unstable and can fall over. Use flat-bottomed pots to ensure the best possible contact with the
hotplate.