Ravas RAVAS-1 - 1 Introduction; 2 General Specifications; 3 Warnings & Safety Measures

USER MANUAL – RAVAS-1
3
1. Introduction
Thank you for using this hand pallet truck with weight indication. Your hand pallet truck with weight
indication was designed to give you a reliable and easy to use product. For your safety and correct
operation, please carefully read this instruction before using it.
NOTE: All of the information reported herein is based on data available
at the moment of printing. We reserve the right to modify our own
products at any moment without notice and incurring in any sanction.
So, it is suggested to always verify possible updates.
2. General Specifications
Capacity
2.200 kg
Graduation
5 kg
Weighing tolerance
0.8% of maximum capacity
Power Source
2 “AA” penlight batteries 1.2-1.5Vdc
Environment
General purpose, dry, little rain
Operating temperature
-10
o
C to 40
o
C (14
o
F to 104
o
F) with
10 to 95% relative humidity
3. Warnings & Safety measures
When using the hand pallet truck with weight indication please observe
carefully the instructions and guidelines contained in this manual.
Always perform each step in sequence.
- All safety regulations that apply to the pallet truck remain valid and unchanged.
- Any modifications done to the system must be approved in writing from the supplier, prior to
any work being completed.
- Do not operate this unit unless you have been fully trained of its capabilities.
- Check the accuracy of the scale on a regular basis to prevent faulty readings.
- Only trained and authorized personnel are allowed to service the scale.
READ
CAREFULLY