Raveland XCA 1002 - User Manual

Version 05/09
 Raveland Endstufe Seite 4 -23
 Raveland Amplifier Page 24- 43
 Amplificateur Raveland
Page 44 - 63
 Raveland eindtrap
Pagina 64 - 83
Item-No. / N
o
de commande / Best.-Nr./ Bestnr.:
XCA 1000 37 22 05
XCA 1002 37 24 69
XCA 1500 37 22 14
XCA 2000 37 24 68

BEDIENUNGSANLEITUNG

OPERATING INSTRUCTIONS

NOTICE D’EMPLOI

GEBRUIKSAANWIJZING

Summary

Overview of Components and Control Elements

Intended Use and Safety Instructions

Safety Instructions

Provides critical warnings and guidelines for safe operation, installation, and handling of the amplifier.

Setup and Mechanical Installation

Mechanical Installation

Connecting the Power Supply

Connecting the Inputs

Input Connection Methods

Connection via Cinch Inputs

Connection via Loudspeaker Inputs

Connecting the Outputs

Connecting Loudspeaker Outputs

Guides on connecting loudspeakers to the amplifier's outputs in stereo and mono-bridge modes.

Operation and Active Duplexer

Active Duplexer

Super Bass Switch and Initial Startup

Initial Startup

Guides on setting up the amplifier after installation and checking connections.

Disposal and Troubleshooting

Troubleshooting

Offers solutions for common problems like no function, no sound, or channel issues.

Technical Data

Raveland XCA 1002 Specifications

General

Channels	2
Frequency response	20 Hz - 20 kHz
Signal-to-noise ratio	>90 dB
THD	<0.05%
Input impedance	10 kOhms
RMS power @ 4 Ohms	2 x 100 W
RMS power @ 2 Ohms	2 x 150 W
Input sensitivity	0.2V - 6V
Bass boost	0 - 12 dB