Manual No. 016-0171-667 Rev. D ECO32077 09/18 9
CR12 CONNECTIONS
The image below shows the connections on the back of the CR12 that will be used for installation. Please note that,
depending on machine configuration, some of these connections may not be used.
FIGURE 7. Back of CR12
CR12 WIRING ILLUSTRATIONS
The illustrations on the next few pages show CR12 wiring diagrams for various cabling generations with optional
accessories and are for reference only.
Ethernet
Port
I/O Cable
Power
Button
USB Port
Power
Connection
Main
Interface
Connector
Video Output/
External Display
AUX
CANbus
Video Input
(Not Used)
To Next Page
Loading...
Need help?
General
