Raven CR7 - CRX Machine Configuration; Creating and Managing Machines

PAGE 23/24 | Calibration manual | 016-8000-015EN | Rev. A
SETUP TRACTOR PROFILE IN GARAGE | CR7 AUTOSTEERING | RAVEN EUROPE GENERIC
68
Measure and enter the distance from the
rear axle to the hitch.
Press next step.
69
Press on the green checkmark.
70
The machine is now entered and configured
in the Machine Garage.
To add implements and Guidance widths,
refer to the CR7 User Manual.
Press the green checkmark to leave the
Machine Garage.
71
Press System Shutdown to shutdown the
CR7.