Only use the air pump as described in these
Children must not use the air pump! This air
The connector and/or nipple can get hot
during use. Be careful not to burn yourself on
Do not use the air pump near infl ammable or
explosive liquids or gases.
Do not leave the air pump unattended
The air pump must not run for more than 8
minutes at a time. Allow it to cool for at least
8 minutes after use. If the air pump gets hot
during use, or if it starts making an unusual
sound, immediately stop infl ation and allow
the air pump to cool for at least 15 minutes.
Charge the air pump for at least 4 hours
before using it for the fi rst time. A full charge
will then take around 2 hours.
Connect the charging cable (10) provided to
the USB socket on the base of the air pump.
Connect the charging cable to a USB charger,
a USB port on a computer or another USB
The charging indicator shows when the air
Screw the hose (8) to the air pump. If
necessary, screw the required nipple (11)
to the connector (9). Attach the connector
or nipple to the valve on the object to be
Press the on/off button (5) to turn the air
pump on. The display (1) comes on.
If necessary, press the U button (4) briefl y
to switch between psi, bar, kPa and kg/cm
If required, press and hold the U button (4) to
switch the built-in torch (7) on and off .
Press the + and - buttons (3, 2) to set the
Press the on/off button (5) to start infl ation.
When the set pressure is reached, infl ation
Press and hold the + (3) or - (2) button to
increase or reduce the pressure manually.
Remove the connector or nipple from the
Press and hold the on/off button to switch
Wipe the air pump with a dry cloth after each
Charge the air pump and store it together
with all the accessories in the case in a dry,
cool and dust-free location if you do not
intend to use it for a prolonged period.
Charge the air pump at least once every
three months, regardless of whether or not it
To Next Page
Loading...