Ray Jefferson CB-845 - Technical Specifications and Diagrams; Ray Jefferson CB-845 Technical Data

TECHNICAL SPECIFICATIONS FOR MODEL CB-845
Indicators and Connectors
Phase Locked Loop Synthesizer System
18 channels all installed
AM
Dual coversion superheterodyne system
Nominal 0.5
More than 45 dB down
lst/10.695 MHz
2nd/455 kHz
0.005%
More than 60 dB down
Maximum 4W at 13.8V DC
0.5 µV to 500 µV
Approx. ±1000 Hz (receive mode only)
3W
at 8-ohm
13.8V DC
On-Off/Volume control, RF GAIN control
Squelch control, Meter switch, CB-PA switch
NB-ANL switch, Tone switch, Delta Tune
RX and TX lamps,
S/RF/SWR
meter, Mic Jack,
Antenna Connector, DC power jack, PA speaker
jack, External speaker jack
Frequency Control
Channels
Mode of Operation
Receiving System
Sensitivity (at 10 dB S/N)
Selectivity (at 10 kHz)
Intermediate Frequency
Frequency Tolerance
Spurious Rejection
RF Output Power
Squelch Range
Delta Tune
Audio Output Power
Power Source
Controls