Need help?Do you have a question about the Raymarine CAM210IP and is the answer not in the manual?
General| Camera Type | IP Camera |
|---|---|
| Frame Rate | 30 fps |
| Night Vision | Yes |
| Video Compression | H.264 |
| Ingress Protection | IP66 |
| Resolution | 1920 x 1080 (Full HD) |
| Connectivity | Ethernet |
| Power Supply | Power over Ethernet (PoE) |
| Operating Temperature | -25°C to +55°C |
| Field of View | 90 degrees |
Explanation of Power Over Ethernet system and classifications for powering devices.
Crucial safety warnings for installation, power supply, and operation.
Explains the two primary powering methods: PoE and self-powered options.
Details on connecting the power cable for self-powered or PoE injector setups.
Guides on connecting the camera to an MFD or PC via network cables.
Details network setup, login, IP address finding, and browser configuration for accessing the camera.
Provides steps to reset camera settings to their original factory default values.
Provides common causes and corrective actions for marine electronics installation problems.
Addresses specific issues like power, image display, video performance, and IP address detection.
Detailed physical, power, environmental, camera, and video specifications for CAM200IP/CAM210IP.
To Next Page
