Do you have a question about the Raymarine Digital Radome Scanner and is the answer not in the manual?
Explains how to install, connect, and maintain the Digital Radome scanner.
For navigational radar systems on leisure and work boats, not for SOLAS vessels.
Warns about harmful electromagnetic energy emitted by the radar antenna.
Covers high voltage, product installation, FCC notice, and environmental directives.
Details software compatibility and update requirements for the scanner.
Notes that handbook information may differ from product due to updates.
Instructions on how to register the product for warranty benefits.
Guidelines for optimizing EMC performance during installation.
Lists the items included in the scanner package.
Lists the tools needed for installation.
Provides physical dimensions for the 18" and 24" scanner models.
Guidance on where and how to mount the scanner for optimal performance.
Details requirements for connecting the scanner cables, including types and lengths.
Specifies power supply needs and fuse requirements for the radar system.
Explains the importance and method of grounding the radar system for RF safety.
Describes how to connect the scanner's power and digital cables to the display.
Instructions and diagrams for physically mounting the scanner unit.
Details how to fasten the scanner securely to the mounting platform, including torque specs.
Steps for initial scanner setup and configuration before use.
How to verify the installation meets EMC standards.
Procedures to verify the scanner and system functionality.
Guide for initial power-up, alignment, and timing adjustments.
How to perform a transmission test safely.
How to ensure the radar bearing is accurate relative to the boat's bow.
General advice on maintenance and troubleshooting procedures.
Periodical checks recommended for maintaining the scanner's performance.
Identifies common problems and their solutions for the scanner.
Information on accessing online support resources and FAQs.
Contact numbers for technical assistance in different regions.
Details required when contacting support for product identification.
Detailed technical specifications for the 18-inch RD418D scanner.
Detailed technical specifications for the 24-inch RD424D scanner.