Need help?Do you have a question about the Raymarine RNS-5 and is the answer not in the manual?
Covers critical safety warnings related to installation and operation of the product.
Details specific warnings for product grounding and positive ground systems.
Mentions disclaimers, EMC installation guidelines, and suppression ferrites.
Instructs users to register their product for warranty benefits and retain the serial number.
Directs users to dispose of the product according to the WEEE Directive.
Specifies the RNS-5 Network Switch (A80731) as the applicable product.
Lists the relevant documentation for the product, including this manual.
Details the RNS-5 network switch's features and capabilities.
Lists essential components needed for system setup, like network cables.
Describes a typical system configuration with the switch, connections, and devices.
Lists the types of network devices compatible with the RNS-5 network switch.
Details the specific parts supplied with the RNS-5 Network Switch.
Specifies the requirement for an inline fuse and fuse holder for power connection.
Provides detailed measurements and labels for the RNS-5 Network Switch.
Directs users to important warnings and cautions for product installation.
Details ventilation, mounting surface, cabling, water ingress, electrical interference, and power supply considerations.
Recommends placement and cable routing for optimal Electromagnetic Compatibility.
Specifies the recommended safe distance from installed compasses.
Details the specific tools needed for installation, including a power drill and screwdriver.
Provides step-by-step instructions for securely mounting the network switch.
Covers cable type, length, routing, bend radius, protection, strain relief, and suppression ferrites.
Provides step-by-step instructions for connecting cables to the product.
Explains how to connect multiple network switches in a daisy-chain for larger systems.
Describes the different types of network cable connectors used with the switch.
Covers connection scenarios using RayNet, RJ45 (SeaTalkhs®), and RJ45 cables.
Guides on connecting Raymarine equipment with RayNet connectors.
Details connecting equipment with RJ45 (SeaTalkhs®) connectors using adapter cables.
Explains how to connect equipment with standard RJ45 connectors.
Details the direct connection to a 12V or 24V power source using the supplied cable.
Discusses best practices for power distribution and important considerations.
Guides on extending power cables, including wire gauge recommendations.
Details the connection of the drain wire to RF ground or battery negative terminal.
Provides causes and corrective actions for common installation and operation problems.
Offers solutions for issues like blown fuses, tripped breakers, and power supply problems.
Details LED indications for power status and faults, with required actions.
Explains the meaning of port LEDs for network speed, activity, and errors.
Reinforces that maintenance and repair should be done by authorized dealers.
Details routine checks like examining cables for damage and secure connections.
Gives specific instructions on how to clean the product safely.
Provides contact details for Raymarine support in various regions and web support resources.
Describes diagnostic product information, its uses, and how to access it via the Diagnostics menu.
Highlights learning resources like video tutorials and the YouTube channel.
Lists physical, power, network, environmental, and conformance specifications for the RNS-5.
Specifies the available spare part: a 1.5m power cable.
Details RayNet to RayNet cables and connectors, including types and part numbers.
Lists various RayNet to RJ45 adapter cables with lengths and part numbers.
To Next Page
General
