To Next Page
B
Bryan VargasJul 31, 2025
Why is instrument, engine, or system data unavailable on all Raymarine SeaTalk-SeaTalk ng Media Converter displays?
- ZZachary CookJul 31, 2025
This issue can occur if data isn't reaching the display due to problems with the data bus wiring and connections. Verify the integrity of the SeaTalkng wiring. It could also be that the data source, such as an ST70 instrument or engine interface, isn't working. Check the power to the SeaTalk bus and the data source itself. A software mismatch between devices can also cause this issue.
General
