Rayne Versa User Manual

Rayne Versa Service Manual
Water Conditioning
This manual contains information on setting the controller
and normal operating maintenance required by the owner.
This valve can be used on any tank but comes standard on the Rayne Versa Softeners listed on the
following page
Rayne Versa Service Manual
MODEL NUMBERS DESCRIPTION COMMENTS

Rayne Versa Specifications

General

Brand	Rayne
Model	Versa
Category	Water Dispenser
Language	English

Summary

Wiring For Correct On/Off Operation

OEM General Instructions

Control Valve Setup Procedures

Operation and Diagnostics

Resetting to Defaults

Double Regeneration Procedure

Steps to initiate and complete two regenerations within 24 hours for specific system setups.

Proportional Brining Setup

OEM Setup Instructions

OEM Setup Step Sequence

Details the sequence of button presses for OEM setup, including lock activation and unlocking procedures.

Valve Type and Flow Meter Selection

Selecting Valve Size and Type

Guide for selecting valve size (1.0 to 2.0) and handling WS2/WS2L valve version compatibility.

Flow Meter Size Selection

Advanced Control Valve Features

Alternator or No Hard Water Bypass

Options for using the control valve as an alternator, for no hard water bypass, or for a separate source.

Twin Alternator Operations

Twin Alternating System Programming

Details programming for twin alternating systems using time clock or delayed regeneration.

Configuring Special Operations

No Hard Water Bypass Configuration

Instructions for connecting a Clack No Hard Water Bypass Valve to the MAV DRIVE connector.

Separate Source Operation Setup

Upflow Cycle Limitations