Rayne Versa - Wiring For Correct On;Off Operation

1 V3381-01ES WS 1ER FRONT COVER ASSEMBLY BLACK/SILVER
2 V3107-01 WS1 MOTOR 1
3 V3106-01 WS1 DRIVE BRACKET & SPRING CLIP 1
4 V3491ER-01BOARD WS1 THRU 2L ER PC BOARD REPLACE 1
5 V3110 WS1 DRIVE REDUCING GEAR 12X36 3
6 V3109 WS DRIVE GEAR COVER 1
V3186 WS AC ADAPTER 11OV-12V 1
V186EU WS AC ADAPTER 220..240V-12V EU
Shown Not V3186UK WS AC ADAPTER 22O-240V-12VUK
V3186-01 WS1 AC ADAPTER CORD ONLY
Not Shown V3382 WS1ER DRIVE BACK PLATE
For software revs E203.6 and lower
Relay Specifications: To insure proper fit and correct operation use either of the 14cc relay/relay socket
combinations or the exact equivalents.
Manufacturer Option 1 Option 2
Relay Socket Idec SR3P-05C SY4S05C
Relay Idec RR2KP-UAC12V / RR2KP-LJCACl2V RY2KS-UACl2V
The relay supplies 2 sets of dry contacts for user applications.
The wiring of these contacts is application specific.
Wiring For Correct On/Off Operation
PC Board Relay Terminal Relay Socket Model
Block
SR3P.05C SY4S-05C
SET #2 #13
COM #6 and #l0 #12 and #14
RES #3 #9
For software revs E204.5 and higher
Relay Specifications: 12V DC Relay with a coil resistance not
less than 80 ohms. If mounting the relay under the cover check-