Need help?Do you have a question about the Raypa AE-150 DRY and is the answer not in the manual?
Identifies key components on the front and rear panels of the autoclave for user reference.
Provides key technical data, including temperature, pressure, voltage, power, and sterilization times.
Guides on proper installation, placement, and electrical connection, including grounding requirements.
Step-by-step guide to reconfiguring the autoclave for different voltage inputs using internal bridges.
Explains how to access programming mode, edit programs, and adjust date/hour settings.
Details sterilization phases for solids/liquids, startup, and water filling.
Details how to manually print sterilization results and configure automatic printing settings.
Lists and explains common warning and failure messages encountered during operation and their resolutions.
Provides instructions for repairs, using spare parts, and information regarding the product warranty.
States that the autoclave models comply with EU safety and electromagnetic compatibility directives.
General| Model | AE-150 DRY |
|---|---|
| Category | Industrial Equipment |
| Type | Drying Oven |
| Capacity | 150 liters |
| Temperature Range | Ambient +5°C to 250°C |
| Internal Dimensions (W x H x D) | 500 x 600 x 500 mm |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Control | Digital PID |
| Display | LCD |
| Temperature Stability | ±0.1°C |
| Power Supply | 230V / 50-60Hz |
To Next Page