Need help?Do you have a question about the Raytools BM109 SERIES and is the answer not in the manual?
General| Laser Type | Fiber Laser |
|---|---|
| Wavelength | 1070nm |
| Nozzle Type | Single, Double, Customized |
| Cutting Speed | Dependent on laser power and material |
| Cutting Thickness | Dependent on laser power and material |
| Positioning Accuracy | Dependent on machine tool |
| Repeatability | Dependent on machine tool |
Lists key benefits and specifications of the BM109 series laser cutting head.
Details the five basic functional units of the BM109 laser cutting head.
Explains the mounting hole size and position for the BM109 laser head.
Details specifications for water-cooled interface and auxiliary gas connections.
Guides on connecting the cutting head power and encoder cables to the system.
Covers fiber input interface and procedures for insertion and alignment.
Details the configuration for the non-bus position loop system.
Explains the wiring connections for the driver and stepping motor.
Guides on setting parameters and operational procedures for the interface.
Guides on centering the laser beam using the QBH interface and adjusting screws.
Explains the manual process for adjusting the focus position.
Provides tools and instructions for cleaning the protective lenses of the cutting head.
Details procedures for removing and installing protective, collimating, and focus lenses.
Instructions for replacing nozzle connectors, ceramic body, and nozzles.
Guides on diagnosing common faults in the driver using LED indicators and fault codes.
Illustrates the mechanical and optical components of the cutting head with labels.
Shows diagrams of the cutting head's interface type and focus lengths.
To Next Page
