Owner manual
*Important: If your seat post is not inserted
up to the minimum insertion mark, the
seat post may break.
Once the saddle is at the correct height,
make sure the seat post should be up to its
insertion mark.
1. Seat height. Place the saddle tube on
the saddle post and tighten using the quick
release lever.
OPEN CLOSE
MINIMUM
EXTENSION
MARK
2. Inclination. To correct the inclination
of the saddle, you will find a nut under the
saddle bars that will allow you to adjust
it to your comfort. Loosen it with an M14
wrench. Once adjusted,
lock it again.
To Next Page
Loading...
