08. Take care of your Cruzer
Owner manual
Before charging the battery please note the
following points.
1. The battery can be charger by the AC, the switch is not
necessary to be turned on.
2. Insert charger output plug into the battery securely and
then, plug the main cable of the charger into a reachable AC
outlet.
3. When charging, the LED on the charger will become red,
showing the charging is on. When it becomes green, you
can finish charging the battery.
4. To finish charging, you must disconnect the charger
input plug first from the AC outlet, and after that,
disconnect the charger output plug from the battery pack.
Finally, close the cover on the charging socket of the battery
pack and check the socket is covered.
Do not use this charger in an environment of
explosive gas and corrosive substances.
Never shake, punch or toss the battery charger, to
protect it from damage.
Always protect the battery charger from rain and
moisture.
This battery charger should be normally used under
temperature, ranged between 0ºC to +40ºC.
Battery Charger
To Next Page
Loading...
