Owner manual
BLACK: KEY SWITCH
RED: CHARGE PLUG
YELLOW: POWER
3. Connect the battery cables.
OPEN
BAT TE RY
BASE
BATTERY
1. Open the battery case. First open the
zipper and then open the battery case.
2. Place the battery inside. Place the
battery on the anti-slipping battery base,
leaving the cables on the upper part of the
case.
4. Close the battery case. If the battery case has been
removed from the bike, place it back. Consult the section
“Battery installation” next in this manual to learn how to do it.
To Next Page
Loading...
