Owner manual
1. Choose lubricant. Select the lubricant that best suits
the conditions of use. There are special lubricants for wet
weather, snow, rain or dry weather.
2. Clean the chain. Apply some type of degreaser to the
chain. You will get them in all bike shops or even in various
shopping centers. For the next step, you will need a regular
rag. Once the degreaser is sprayed on, hold the rag against
the bike chain and with your free hand move the pedals
back so that the chain runs through the rag and absorbs the
dirt.
3. Apply lubricant. Shake the container well. Drop the
fluid from inside onto the chain while using your free hand
to run the chain backward so that the lubricant sticks to its
full length evenly.
4. Clean the excess lubricant. With the other side of
the cloth we remove the excess lubricant from the chain
making it run.
To Next Page
Loading...
