Owner manual
1. Remove the front mudguard. Use an M3 allen
key to remove both screws attaching the bracket to
the sides. Use an M4 allen key to remove the front
screw holding the mudguard on the fork.
2. Remove the rear wheel for the rear
mudguard. As the lower screws of the mudguard
are behind the wheel, follow the steps of the section
"Change rear wheel” in this manual to correctly
remove the rear wheel.
3. Remove the rear mudguard. Once the wheel is
removed, use an M3 allen key to remove both screws
attaching the bracket to the sides and the screws
holding the mudguard to the bottom of the frame.
4. Place the new mudguards. If needed, first
assembly the brackets to the mudguards. Then,
put the new mudguards in place and lock them in
position with all the screws back.
5. Place the rear wheel back. Once the
mudguards are installed, follow the steps of the
section "Change rear wheel” in this manual to
correctly fit the rear wheel.
To Next Page
Loading...
