Razer KRAKEN Pro - Technical Specifications; Headphone Specifications; Microphone Specifications; In-Line Control Features

4 | For gamers by gamers™
3. TECHNICAL SPECIFICATIONS
HEADPHONES
 Frequency response: 20 - 20,000 Hz
 Impedance: 32 Ω at 1 kHz
 Sensitivity (@1kHz, 1V/Pa): 110 ± 4 dB at 1 kHz max
 Input power: 50 mW
 Drivers: 40 mm, with neodymium magnets
 Inner ear cup diameter: 50 mm / 0.16 ft
 Cable length: 1.3 m / 4.27 ft plus 2 m / 6.6 ft splitter adapter
 Approximate weight: 300 g / 0.66 lbs
 Connector: Analog 3.5 mm combined jack (headphone and mic)
MICROPHONE
 Frequency response: 100 – 10,000 Hz
 Signal-to-noise ratio: 52 dB
 Sensitivity (@1 kHz, 1 V/Pa): -40 ± 4 dB
 Pick-up pattern: Unidirectional
IN-LINE CONTROL
 Analog volume control wheel
 Microphone quick mute toggle