250-070
P2007 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
• Fasten the brake line. Make sure it is working correctly.
• Tighten the adjusters of the rear axle on both sides equally.
• Turn the rear wheel to check if the v-belt is placed correctly.
• If not unfasten the adjusters of the rear axle and gauge the v-belt.
• Tighten the screws of the brake housing thoroughly and reinstall the chain guard.
Vorderrad:
• Unscrew the front wheel brake.
• Loosen the mounting of the front axle and remove the front wheel.
• To exchange the tire or the front wheel pull the complete wheel itself out of the attachment Make sure
that you have an eye on the correct order of the mounting components.
• Reassemble the wheel and its mounting components in reverse order.
To Previous Page
Loading...
