Razor A 5 Lux Scooter - Before You Begin; Required Tools

Removecontentsfrombox.Removethefoamseparatorsthatprotectthecomponentsfromdamageduringshipping.
Inspectthecontentsoftheboxforscratchesinthepaint,dentsthatmayhaveoccurredduringshipping.Becauseyour
scooterwasassembledandpackedatthefactory,thereshouldnotbeanyproblems,eveniftheboxhasafew
scars or dents.
BEFORE YOU BEGIN
WARNING: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
SCOOTER.
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
q Required Tools
We recommend the use of mechanic’s grade tools.
3mm&5mm
hexagonalkeywrench
Handlebar
Steering tube quick-release lever
Extensiontube/steeringcolumn
Joint lever/pivoting mechanism
Rear Fender/brake
T-tube
Collar clamp
Front fork
Deck
Steering column adjusting screw