EasyManua.ls Logo

Razor BGC2230M - User Manual

Razor BGC2230M
14 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Outdoor Portable LP Gas Griddle
Model No. GGC2030M Model No. GGC2030M
（（Manufacture CodeManufacture Code: : BGC2230MBGC2230M））
OWNER’S OWNER’S MANUALMANUAL
Manufactured in China for: RevoAce Inc. Limited
Hong Kong, China • 1.800.694.0013 • service@revoace.com
8:00 am to 4:00 pm central time, Monday to Friday.
© RevoAce Inc. Limited
Razor
®
is a registered trademark of Mr. Bar-B-Q Products LLC. Used with permission.
GriddleOn
is a trademark of Mr. Bar-B-Q Products LLC. Used with permission.
Make it Sizzle
TM
is a trademark of Mr. Bar-B-Q Products LLC. Used with permission. GGC2030M-E-OM-F103
PATENT NO. D911,091 S
D920,044 S
Table of Contents
Important Safeguards ...........................................................Page 2
Expanded View & Hardware .......................................................... 4
Assembly Instructions............................................................... 5
Griddle Storage & Transporting ....................................................... 7
Installing LP Gas Tank.............................................................. 10
Operating Instructions.............................................................. 10
Cleaning and Care ................................................................ 11
Product Registration ............................................................... 12
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Limited Warranty ................................................................. 12
Troubleshooting .................................................................. 13
The use and installation must conform with local codes or, in the absence of local codes, with either the
National Fuel Gas Code, ANSI Z223.1/NFPA 54, Storage and Handling of Liqueed Petroleum Gases, ANSI/
NFPA 58, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code,
B149.2, or the Standard for Recreational Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV Series, as
applicable.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP
FOR FUTURE REFERENCE.
If you are assembling this unit for someone else, give this manual to them to read and save for future
reference.
¸ WARNING: This product can expose you to chemicals including carbon monoxide,
soot, lead and lead components,which are known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
Made from 75% Bagasse
(environmentally friendly sugar
cane pulp by-product)
WARNING
FOR YOUR SAFETY:
For Outdoor Use Only
(outside any enclosure)
DANGER
If you smell gas -
• Shut off gas to appliance.
• Extinguish any open flame.
• Open Lid.
• If odor continues, keep away from the
appliance and immediately call your fire
department.
Failure to follow these instructions could result
in fire or explosion which could cause property
damage, personal injury or death.
WARNING
FOR YOUR SAFETY:
1. Do NOT store or use gasoline or other
flammable liquids or vapors in the vicinity
of this or any other appliance.
2. An LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.
3. Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage.
4. Read the installation, operation, and
maintenance instructions thoroughly
before installing or servicing this
equipment.
DANGER
• Never operate this appliance unattended.
• Never operate this appliance within 10
ft (3.0 m) of any structure, combustible
material or other gas cylinder.
• Never operate this appliance with 25 ft (7.5
m) of any flammable liquid.
• Do not fill cooking vessel beyond maximun
fill line.
• Never allow oil or grease to get hotter than
400°F or 200°C. If the temperature exceeds
400°F ( 200°C) or if oil begins to smoke,
immediately turn the burner or gas supply
OFF.
• Heated liquids remain at scalding
temperatures long after the cooking
process. Never touch cooking appliance
until liquids have cooled to 115°F ( 45°C)
or less.
• If a fire should occur, keep away from the
appliance and immediately call your fire
department. Do not attempt to extinguish
an oil or a greas fire with water.
Failure to follow these instructions could result
in fire, explosion or burn hazzard which could
cause property damage, personal injury or
death.
IMPORTANT
After each use, always season your griddle per “Seasoning
Griddle” section.
WARNING
FOR YOUR SAFETY:
DO NOT LEAVE THIS APPLIANCE UNATTENDED
WHILE IN USE, ESPECIALLY COOKING THE FATTY
MEAT AND CLOSE THE LID TOO LONG TIME.
razorgriddle.com
@razorgriddle
@razorgriddle
¸ WARNING: Always remove the regulator before folding down the griddle!

Table of Contents

Questions and Answers

  • D
    dixonmanuelAug 15, 2025
    What to do if Razor Griddle burner will not light with a match?
    • J
      John DuranAug 15, 2025
      If the burner on your Razor Griddle won't light with a match, it could be due to several reasons. There might be no gas flow (check if LP gas tank is empty, and if not, refer to “Sudden drop in gas flow or reduced flame height”), the LP gas tank might be low or empty (replace LP gas tank), or there could be an LP gas leak (disconnect LP gas tank, wait 5 minutes for gas to clear, connect LP gas tank, and check for leaks). Other potential causes include a coupling nut and regulator not fully connected (tighten by hand only), an obstruction of gas flow (clear burner/venturi tube), spider webs or insect nest in venturi (clean burner/venturi tube), or a clogged or blocked burner port (clean burner port).
  • B
    Bruce OrtizAug 18, 2025
    What to do if Razor Griddle burner will not light using igniter?
    • N
      natasha79Aug 18, 2025
      If the burner on your Razor Griddle won't light using the igniter, the LP gas tank might be low or empty (replace LP gas tank). Another cause can be an LP gas leak (disconnect LP gas tank, wait 5 minutes for gas to clear, connect LP gas tank, and check for leaks). Also the bottom bowl and ash pan may be covered with ashes (clear bottom bowl and ash pan of ashes). Wires or electrode may be covered with cooking residue (clean wire and/or electrode with rubbing alcohol), or the electrode and burners are wet (wipe dry with cloth).
  • M
    mathewstonyaAug 21, 2025
    What to do if Razor Griddle has flare-up?
    • S
      Shelby ButlerAug 21, 2025
      If your Razor Griddle experiences a flare-up, it could be due to grease buildup, excess fat in the meat, or excessive cooking temperature. Remove and clean all griddle parts, trim fat from meat before cooking, and adjust (lower) the cooking temperature.
  • A
    Albert GuerreroAug 25, 2025
    Why is the flame yellow or orange on my Razor Griddle?
    • H
      hmayAug 26, 2025
      A yellow or orange flame on your Razor Griddle may be due to several reasons: new burner may have residual manufacturing oils (operate griddle for 15 minutes on high), spider webs or insect nest in burner/venturi tube (clean burner/venturi tube), food residue, grease, etc. on burner (clean burner), or poor alignment of valve to burner/venturi tube (ensure burner/venturi tube is properly engaged with valve).
  • D
    Donna SanchezAug 28, 2025
    What to do if the flame goes out on my Razor Griddle?
    • J
      Jamie HallAug 28, 2025
      If the flame on your Razor Griddle goes out, it may be due to high or gusting winds (do NOT use griddle in high winds) or low LP gas (replace LP gas tank). Another possible cause is the overflow valve tripped (refer to “Sudden drop in gas flow or reduced flame height”).
  • D
    Dean ArmstrongAug 31, 2025
    Why is there a sudden drop in gas flow or reduced flame height on my Razor Griddle?
    • D
      Dean BrowningAug 31, 2025
      A sudden drop in gas flow or reduced flame height on your Razor Griddle is usually caused by running out of gas. Replace the LP gas tank.
  • M
    mendozaearlSep 4, 2025
    What causes a persistent grease fire on a Razor Griddle and how to stop it?
    • P
      patty76Sep 4, 2025
      A persistent grease fire on your Razor Griddle is typically caused by grease trapped by food buildup around the burner system. Turn the control knob to “ OFF”, let the fire burn out, and after the griddle cools, remove and clean all griddle parts.
  • C
    Caroline HendricksSep 7, 2025
    How to fix irregular flame pattern on Razor Griddle?
    • A
      Alexis PhillipsSep 7, 2025
      An irregular flame pattern on your Razor Griddle, where the flame doesn't run the full length of the burner, is usually due to a clogged or blocked burner port. Clean the burner port to resolve this issue.
  • W
    wgarciaSep 12, 2025
    What causes flashback (fire in burner tube(s)) in Razor Griddle and how to fix it?
    • A
      Andrea RobertsSep 12, 2025
      Flashback (fire in burner tube(s)) in your Razor Griddle is caused by blocked burner and/or burner tubes. Clean the burner and/or burner/venturi tube.

Razor BGC2230M Specifications

General IconGeneral
BrandRazor
ModelBGC2230M
CategoryGrill
LanguageEnglish

Related product manuals