HEADLINE
10
REPAIR AND MAINTENANCE
10
Replacing the Fuse
Required Tool: 5 mm Allen Wrench
WARNING:
To prevent shock, please follow the
instructions accordingly and do not
skip or combine any steps.
2 Using a 5 mm Allen wrench,
loosen the two (2) bolts underneath
the rear of the seat and remove
the fairing.
5 Remove the fuse and replace
with a new one of equal amperage.
Close the fuse cover and reattach the
battery cover, fairing, and plastic cap.
3 On the opposite side of the charger port, locate and remove the seven (7)
bolts using a 5 mm Allen wrench. Separate and remove cover.
1 Using a 5 mm Allen wrench,
remove the bolt.
4 Locate the fuse box attached to
the batteries. Open the fuse cover to
expose the fuse.
30 Amp
To Next Page
Loading...
