Razor E125

8
REPAIR AND MAINTENANCE
10
Install the axle adjusters
and axle nuts. Tighten until they
just barely hold the hardware
in place.
11
Tighten both axle adjust-
ers the same number of turns
to fi ne-tune the tension on the
chain and to approximately
maintain the centering of the
wheel.
12
T
ighten the brake housing
anchor securely. Test ride and
check. Readjust as needed.
13
R
eplace the chain guard.
E_Series_Manualv10.indd 9 3/10/06 2:11:07 PM