Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
2
BEFORE YOU BEGIN
Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents that may have occurred during shipping. Because
your scooter was partially assembled and packed at the factory, there should not be any problems, even if the box
has a few scars or dents.
WARNING:
DO NOT USE NON-RAZOR PARTS
WITH YOUR SCOOTER.
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on the
basis of its compatibility with the
frame and all other parts. Certain
aftermarket components may not
be compatible. Use of non-Razor
parts will void the warranty.
Product ID Locations:
(See locations to the left)
1. Side of Deck Frame
2. UPC Side of Box (Not Shown)
Front/Left Brake Lever
Rear/Right Brake Lever
Front Wheel
Rear Wheel
Handlebars
Collar Clamp
Deck
1.
Box Contents:
• Flashback Scooter
• Owner’s Manual
• Allen Wrench
• Two (2) 13/16 mm Wrenches
• 8/10 mm Wrench
Required Tools
5 mm Allen Wrench
(Included)
Two (2) 13/16 mm Wrenches
(Included)
8/10 mm Wrench
(Included)
To Next Page
Loading...
Need help?
General