WARNING: Failure to
properly engage the spring-loaded
buttons may cause the handlebars
to dislodge while in use and may
cause you to lose control and
fall. When correctly engaged, the
handlebars will not rotate nor will
they move sideways. Note that
when properly engaged, the spring-
loaded buttons are clearly visible in
the holes on the main shaft.
3 Unfold the foot pegs.
3
Need Help? Visit our website for replacement parts and product support at www.razor.com or call toll
free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the
product) available for better assistance.
ASSEMBLY AND SET-UP
q Unfolding the GoGo for first time use
2
Make certain BOTH handlebars are properly
locked onto the main shaft.
1 Insert and secure the left and right handlebars by
pressing the spring-loaded buttons and inserting them
into the main shaft.
To Next Page
Loading...