Need help?Do you have a question about the RBH Sound Axiom V and is the answer not in the manual?
Details power supply requirements and host interface options for connecting the NC-100.
Configuration settings via DIP switches for addressing, baud rate, direct connect, and RS485 interface.
Explains C-NET and D-NET interfaces, connection diagrams, and network topology.
C-NET cable types, lengths, and related specifications.
Interpretation of status LEDs for computer port, network communication, and system run status.
D-NET cable types, lengths, shielding, and termination requirements.
Procedure for performing a complete memory reset on the NC-100 controller.
Terminal connections for all RC-2 outputs, inputs, power supplies, and battery backup.
Configuration of RC-2 address using DIP switches and understanding operational status LEDs.
Description of RC-2 inputs, including RTE, door contact, and various supervised input circuit types.
Explanation of RC-2 output functions, default operations, and access point operating modes.
Wiring diagrams for connecting various readers and keypads to the RC-2 controller.
Covers power, battery backup, fire release input, and tamper switch connections for the IOC-16.
Configuration of IOC-16 address and DIP switches for input/output selection and fail-safe operation.
Understanding IOC-16 status indicators, battery tests, and protection mechanisms.
Methods for programming IOC-16 ports as inputs or outputs via hardware and software.
Implementing elevator access control using IOC-16, including wiring and fail-safe logic.
Visual guide for wiring the IRC2000 board used in NRC2000/NURC2000 systems.
Instructions for connecting NRC2000 and NURC2000 units to the NC-100 controller.
Details on necessary modifications for NRC2000 units due to hardware limitations.
Details on the PC-100's power requirements and the function of its status LEDs.
General| Brand | RBH Sound |
|---|---|
| Model | Axiom V |
| Category | Security System |
| Language | English |
To Next Page